INTERTHERM Colour. Gloss Level. Volume Solids. Typical Thickness. Theoretical Coverage. Practical Coverage. Method of Application. Drying Time. A one component, general purpose heat resistant paint, based on air drying oleoresinous resins, and pigmented with aluminium flake. Consult International Marine’s INTERTHERM DATA SHEET brochure on NauticExpo. Page: 1/4.
|Published (Last):||26 March 2011|
|PDF File Size:||2.44 Mb|
|ePub File Size:||17.14 Mb|
|Price:||Free* [*Free Regsitration Required]|
It is your responsibility to read the Product Data Sheets available below before you place an order and prior to application of intergherm product. Subject to reinspection thereafter. All surfaces to be coated should be clean, dry and free from contamination. Products Marine Coatings Marine chemicals Marine lubricants. All surfaces to be coated should be clean, dry and free from contamination. Read and follow all precautionary notices on the Material Safety Data Sheet and container labels.
If Intertherm is used over a primer system the heat resistance may be determined by the primer system.
If you do not fully understand these warnings and instructions or if you can not strictly comply with them, do not use this product.
In the event welding or flame cutting is performed on metal coated with this product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation.
Marine Coatings Page 1 of 4 Issue Date: Typical Coverage per coat Prevent the ingress of moisture as this may lead to a pressure build up in the container.
International Intertherm 891
Material should be filtered prior to use. High pressure fresh water wash or fresh As a light reflective finish for cargo holds, pipes, etc. I would like to hear about offers and services: Consult your local International Paint representative for specific recommendations. Test performance results were obtained in a controlled laboratory environment and International Paint makes no claim that the exhibited published test results, or any other tests, accurately represent results actually found in all field environments.
These may be subject to variation interthrm on factors such as differences in colour and normal manufacturing tolerances.
Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health 89 safety information.
The content of this website is our best recommendation and is not advice. Technical and application data herein is for the purpose of establishing a general guideline of the coating and proper coating application guidelines.
Actual safety measures are dependant on application methods and work environment.
Use International GTA only in exceptional circumstances. Consult your local International Paint representative for specific recommendations. Store in dry, shaded conditions away from sources of heat and ignition.
Take precautions to avoid skin and eye contact ie. Thinning may be required.
This material is a one pack inteftherm and should always be mixed thoroughly with a power agitator before application. Petersburg, Russia, phone: Consult your International Paint representative for the system best suited for interthfrm surfaces to be protected. Unmixed material in closed containers should be maintained in protected storage in accordance with the information given in the STORAGE section of this data sheet.
The primer surface should be dry and free from all contamination, and Intertherm must be applied within the overcoating intervals specified consult the relevant product data sheet.
Open the catalog to page 3. DO NOT thin more than allowed by local environmental legislation.
International Intertherm – Rawlins Paints
Customer further agrees that we have no liability for any errors integtherm omissions contained within the Product Data Sheets. This product is no longer in stock. If Intertherm is used over a primer system the heat resistance may be determined by the primer system.
The figures stated above are approximate. The temperature interthrem the surface to be coated Loose or flaking coatings should be removed back to a firm edge and Intertherm or an appropriate primer should be used to repair the area before application of the full coat.
Thinning is not normally required. Overcoating information is given for guidance only and is subject to regional variation depending upon local climate and environmental conditions. Consult the local representative for advice during application in extreme conditions. Send us your question. Airless Spray Recommended Tip Range 0. Intertherm may be applied directly over aged Intertherm following thorough fresh water washing and degreasing provided the coating to be overcoated is in an intact and tightly adherent condition.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Interthem Sheet for the Product. Open the catalog to page 2.
International Intertherm is a one component, general purpose heat resistant paint, based on air drying oleoresinous resins, and pigmented with aluminium flake. Thoroughly flush all equipment with GTA